SW053A
$2,750.00
Description
AAQUATOOLS | SELF-ROTATING SECTOR CLEANING HEAD
053W CartBlaster Cleaning Head
SW053A water-powered rotating cleaning head featuring a controlled 240° rotary spray pattern for targeted cleaning of carts, bins, containers and industrial equipment.
The SW053A is a self-rotating, water-driven sector cleaning head used with AaquaTools Tip-Too and CartBlaster II systems. Its controlled 240° rotary spray directs high-pressure cleaning impact where it is needed.
With an operating flow range of 4–16 GPM and a maximum pressure of 2,100 PSI, the SW053A provides targeted cleaning coverage. The correct diffuser and nozzle configuration must be selected to match the pressure washer’s operating specifications.
COMPATIBLE AAQUATOOLS SYSTEMS
Tip-Too • CartBlaster II
KEY OPERATING INFORMATION
240° Rotary Cleaning for Carts, Bins & Containers
|
OPERATING FLOW
4–16 GPM
Configuration dependent
|
MAXIMUM PRESSURE
2,100 PSI
Maximum operating pressure
|
|
MAXIMUM TEMPERATURE
194°F
90°C
|
SPRAY COVERAGE
240° Rotary
23 rotations per full cycle
|
PRODUCT DETAILS
Configuration & Specifications
| Product Model | 053W (CartBlaster Cleaning Head) |
|---|---|
| Cleaning Head Model | SW053A |
| Product Type | Water-powered rotating sector cleaning head |
| Operating Flow | 4–16 GPM |
| Maximum Pressure | 2,100 PSI |
| Maximum Temperature | 194°F / 90°C |
| Spray Coverage | 240° rotary sector |
| Full Cleaning Cycle | 23 rotations |
| Cycle Time | Approx. 15 seconds at 90 RPM |
| Nozzles | 2, 3 or 4 |
| Nozzle Connection | 1/8" NPT |
| Water Inlet | 1/2" |
| Built-In Filter | 700 micron |
| Recommended Filtration | 60 micron between pump and head |
| O-Ring Options | NBR / EPDM / Viton |
| Seals | PTFE + carbon fiber |
| Materials | AISI 316 stainless steel, aluminum and brass |
| Minimum Center-Line Opening | 4.49" / 114 mm |
| Minimum Manual Opening | 3.54" / 90 mm |
| Weight | Approx. 10 lb. |
| Compatible Systems | Tip-Too and CartBlaster II |
| Applications | Carts, bins, containers and industrial equipment |
Not Sure If This Cleaning Head Fits Your System?
The SW053A operates within a 4–16 GPM flow range and has a maximum pressure of 2,100 PSI. The cleaning head must be configured with the correct diffuser and nozzle combination for your pressure washer and application.
Important:
Please confirm your pressure washer’s GPM and PSI before ordering. Changes in operating flow may require a different diffuser or nozzle configuration.
|
Confirm Compatibility |
Cleaning Head Service & Repair |
View Parts Breakdown |
Cleaning head configuration, nozzle sizing and equipment compatibility should be confirmed prior to ordering. Specifications are subject to change.
