SW060A-CF
$2,950.00
Description
AAQUATOOLS | HIGH-FLOW ROTATING CLEANING HEAD
SW060A-CF Cleaning Head
Heavy-duty, water-powered rotating cleaning head designed for high-flow interior cleaning of tanks, totes, drums, mixing vessels and other closed industrial containers.
The SW060A-CF is designed for demanding interior cleaning applications where higher water flow and cleaning impact are needed.
With a maximum capacity of 16 GPM and 3,500 PSI, the SW060A-CF is a strong choice for larger vessels, tougher residues and high-flow pressure washer systems.
BEST FOR HIGHER-FLOW CLEANING SYSTEMS
For typical AaquaTools applications, we recommend an 8 GPM or greater pressure washer for best performance.
KEY OPERATING INFORMATION
Higher Flow for Demanding Cleaning Applications
|
MAXIMUM FLOW
16 GPM
60 L/min
|
MAXIMUM PRESSURE
3,500 PSI
200 bar
|
|
MAXIMUM TEMPERATURE
250°F
121°C
|
ROTATION SPEED
70–120 RPM
61 rotations per cycle
|
PRODUCT DETAILS
Configuration & Specifications
| Model | SW060A-CF |
|---|---|
| Product Type | Self-rotating cleaning head |
| Maximum Flow | 16 GPM / 60 L/min |
| Maximum Pressure | 3,500 PSI / 200 bar |
| Maximum Temperature | 250°F / 121°C |
| Rotation Speed | 70–120 RPM |
| Full Cleaning Cycle | 61 rotations |
| Cycle Time | Approx. 36 sec. at 100 RPM |
| Nozzles | 2–4 |
| Nozzle Connection | 1/8" NPT |
| Water Inlet | 1/2" coaxial |
| Minimum Opening | 3.94" / 100 mm |
| Built-In Filter | 700 micron |
| Recommended Filtration | 60 micron between pump & head |
| Diffuser Positions | 4 |
| Drive | Water powered |
| Materials | Aluminum, OT58 brass & AISI 316 stainless steel |
| O-Ring Options | NBR, EPDM or Viton |
| Seals | PTFE + carbon fiber |
| Weight | Approx. 18 lb. |
Not Sure If This Cleaning Head Fits Your System?
The SW060A-CF is designed for higher-flow pressure washer systems. We recommend an 8 GPM or greater pressure washer for typical AaquaTools applications. Please confirm your equipment’s operating GPM and PSI before ordering.
Important:
Nozzle sizing must be matched to your pressure washer’s operating GPM and PSI for proper cleaning head performance.
|
Confirm Compatibility |
Cleaning Head Service & Repair |
View Parts Breakdown |
Cleaning head configuration and nozzle selection should be confirmed prior to ordering. Specifications are subject to change.
